| PANEL CONSTRUCTION |
| |
The Floor Panel consists of high density chipboard. Panel edges are chanfered and covered all around by synthetic PVC which provides protection to the clipboard and surface covering. |
| |
| |
| Panel Thickness |
37mm - 40mm |
| Module |
600mm x 600mm / 610mm x 610mm /
600mm x 800mm |
System Weight (Approx.)
|
36 kg / m² (Varies with finish floor Height) |
| Bottom Finish |
0.5mm Galvanised Sheet / Aluminium Foil |
| Top Finish |
Antistatic Laminate / Antiststic Vinyl |
| Density |
650 - 700 kg / m³ |
| Panel Weight |
11-12 kg. (For 600mm x 600mm Panel) |
|
| |
| |
| LOADING PARAMETERS |
| Point Load / Concentrated Load |
350 - 400 kg Over 25 mm² |
| Uniform Distributed Load |
1250 - 1500 kg/m² |
|
| |
| |
| UNDERSTRUCTURE |
- The understructure consists of adjustable galvanized steel pedestal, yellow chromatized to increase resistance to corrosion.
- Pedestals are glued to the main floor with solvent free adhesive.
- Pedestal Axial Load : 2200 Kgs.
|
| |
| |
| STRINGERS |
Stringers are made from mild steel, yellow chromatized to increase resistance to corrosion. Stringers should be used to increase the lateral stability of floors. required for FFH 500mm & above as well as vertical reinforcement of the system. |
